Built right, tested twice
A laser machine is a long-term investment, so we treat quality as a process, not a promise. Critical components — laser sources, scanners, cutting heads, drives and controllers — are sourced from reputed manufacturers. Every machine is assembled, aligned, calibrated and run-tested on real material before it leaves our facility.
At your site, our engineer repeats the checks, trains your operator and hands over the machine only when it is producing good parts.
- Reputed laser sources & motion components
- Calibration of power, focus & accuracy
- Run test on real material before dispatch
6-stage quality check
- 1
Component inspection
Incoming checks on laser source, optics, electronics and mechanics.
- 2
Assembly & alignment
Beam path, gantry squareness and optics alignment.
- 3
Calibration
Power output, focus, speed and positional accuracy verified.
- 4
Run testing
Machine runs on real material with sample results recorded.
- 5
Safe packing
Moisture-proof and shock-resistant packing for transport.
- 6
Site commissioning
Installation, re-check and operator training at your site.
What we check
Accuracy
Positioning and repeatability measured on test patterns.
Electrical safety
Earthing, wiring and interlocks checked.
Laser performance
Power stability and beam quality verified.
Operator safety
Guards, emergency stops and safety signage.
See our quality for yourself
Book a live demo or send your sample for testing.